GarageCalc What 275/40R17 means
275 is the section width in millimeters (10.8 in). 40 is the aspect ratio: the sidewall is 40 percent of the width, so 275 × 0.40 = 110 mm (4.3 in). R is radial construction, and 17 is the wheel diameter in inches (432 mm). Stack two sidewalls on the wheel and you get the overall diameter: 432 + 2 × 110 = 652 mm, or 25.7 in.
A full marking adds a load index and speed rating after the size, for example 275/40R17 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 275/40R17
Similar diameter does not establish interchangeability. Follow the vehicle manufacturer's approved sizes; see Michelin's tire-size guidance.
Going up one wheel size, the closest match is 275/35R18 at -0.3% diameter with a 96 mm sidewall instead of 110 mm. No common 16-inch size stays within 3 percent either. The 3 percent cutoff is a comparison filter, not a fitment approval. Use vehicle-approved sizes and check rim width, load and speed ratings, and clearances. The comparison calculator shows the full speedometer table for any pair.
Frequently asked questions
How tall is a 275/40R17 tire?
25.7 inches (652 mm) in overall diameter: the 17-inch wheel (432 mm) plus two 110 mm sidewalls. Actual dimensions depend on the tire model, tread depth, pressure and load; check the tire manufacturer specifications.
What is 275/40R17 in inches?
25.7 x 10.8 R17: 25.7 inches tall, 10.8 inches wide, on a 17-inch wheel. The sidewall is 4.3 inches and the circumference is 80.6 inches, so the tire turns 786 times per mile.
What tire sizes are equivalent to 275/40R17?
Within 3 percent of the same diameter on the same 17-inch wheel: 285/40R17 (+1.2%), 255/45R17 (+1.5%), 255/40R17 (-2.5%); on an 18-inch wheel: 275/35R18 (-0.3%), 285/35R18 (+0.8%). The percentage is the diameter change, which is also your speedometer error.
Can I use 285/40R17 instead of 275/40R17?
Nominal size comparison only: 285/40R17 is 1.2% taller (+8 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.3 mph. This does not confirm fitment. Check approved rim widths, load and speed ratings, and vehicle clearances. The nominal extra width adds about 0.20 in of clearance on each side of the tire and a rim width that suits 285 mm.