GarageCalc What 235/65R18 means
235 is the section width in millimeters (9.3 in). 65 is the aspect ratio: the sidewall is 65 percent of the width, so 235 × 0.65 = 153 mm (6.0 in). R is radial construction, and 18 is the wheel diameter in inches (457 mm). Stack two sidewalls on the wheel and you get the overall diameter: 457 + 2 × 153 = 763 mm, or 30.0 in.
A full marking adds a load index and speed rating after the size, for example 235/65R18 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 235/65R18
Similar diameter does not establish interchangeability. Follow the vehicle manufacturer's approved sizes; see Michelin's tire-size guidance.
Going up one wheel size, the closest match is 255/55R19 at +0.1% diameter with a 140 mm sidewall instead of 153 mm. Going down one size, 255/65R17 is +0.1% with a taller 166 mm sidewall for more comfort and pothole margin. The 3 percent cutoff is a comparison filter, not a fitment approval. Use vehicle-approved sizes and check rim width, load and speed ratings, and clearances. The comparison calculator shows the full speedometer table for any pair.
Which cars come with 235/65R18
Typical factory fitments include Nissan Murano (2015 on) and Toyota Highlander base trims (2020 on). Tire size changes with trim and wheel option, so confirm on the door-jamb placard before buying.
Frequently asked questions
How tall is a 235/65R18 tire?
30.0 inches (763 mm) in overall diameter: the 18-inch wheel (457 mm) plus two 153 mm sidewalls. Actual dimensions depend on the tire model, tread depth, pressure and load; check the tire manufacturer specifications.
What is 235/65R18 in inches?
30.0 x 9.3 R18: 30.0 inches tall, 9.3 inches wide, on an 18-inch wheel. The sidewall is 6.0 inches and the circumference is 94.3 inches, so the tire turns 672 times per mile.
What tire sizes are equivalent to 235/65R18?
Within 3 percent of the same diameter on the same 18-inch wheel: 255/60R18 (+0.1%), 245/60R18 (-1.5%), 245/65R18 (+1.7%); on a 19-inch wheel: 255/55R19 (+0.1%), 245/55R19 (-1.4%); on a 17-inch wheel: 255/65R17 (+0.1%), 235/70R17 (-0.2%). The percentage is the diameter change, which is also your speedometer error.
Can I use 245/60R18 instead of 235/65R18?
Nominal size comparison only: 245/60R18 is 1.5% shorter (-12 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 60.9 mph. This does not confirm fitment. Check approved rim widths, load and speed ratings, and vehicle clearances. The nominal extra width adds about 0.20 in of clearance on each side of the tire and a rim width that suits 245 mm.