GarageCalc What 245/45R20 means
245 is the section width in millimeters (9.6 in). 45 is the aspect ratio: the sidewall is 45 percent of the width, so 245 × 0.45 = 110 mm (4.3 in). R is radial construction, and 20 is the wheel diameter in inches (508 mm). Stack two sidewalls on the wheel and you get the overall diameter: 508 + 2 × 110 = 729 mm, or 28.7 in.
A full marking adds a load index and speed rating after the size, for example 245/45R20 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 245/45R20
Similar diameter does not establish interchangeability. Follow the vehicle manufacturer's approved sizes; see Michelin's tire-size guidance.
Going up one wheel size, the closest match is 245/40R21 at +0.1% diameter with a 98 mm sidewall instead of 110 mm. Going down one size, 245/50R19 is -0.1% with a taller 123 mm sidewall for more comfort and pothole margin. The 3 percent cutoff is a comparison filter, not a fitment approval. Use vehicle-approved sizes and check rim width, load and speed ratings, and clearances. The comparison calculator shows the full speedometer table for any pair.
Which cars come with 245/45R20
Typical factory fitments include Dodge Challenger and Charger 20-inch trims. Tire size changes with trim and wheel option, so confirm on the door-jamb placard before buying.
Frequently asked questions
How tall is a 245/45R20 tire?
28.7 inches (729 mm) in overall diameter: the 20-inch wheel (508 mm) plus two 110 mm sidewalls. Actual dimensions depend on the tire model, tread depth, pressure and load; check the tire manufacturer specifications.
What is 245/45R20 in inches?
28.7 x 9.6 R20: 28.7 inches tall, 9.6 inches wide, on a 20-inch wheel. The sidewall is 4.3 inches and the circumference is 90.1 inches, so the tire turns 703 times per mile.
What tire sizes are equivalent to 245/45R20?
Within 3 percent of the same diameter on the same 20-inch wheel: 265/40R20 (-1.2%), 235/45R20 (-1.2%), 255/45R20 (+1.2%); on a 21-inch wheel: 245/40R21 (+0.1%), 255/40R21 (+1.2%); on a 19-inch wheel: 245/50R19 (-0.1%), 225/55R19 (+0.2%). The percentage is the diameter change, which is also your speedometer error.
Can I use 255/45R20 instead of 245/45R20?
Nominal size comparison only: 255/45R20 is 1.2% taller (+9 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.3 mph. This does not confirm fitment. Check approved rim widths, load and speed ratings, and vehicle clearances. The nominal extra width adds about 0.20 in of clearance on each side of the tire and a rim width that suits 255 mm.